Free Step By Step Instructions For Motorola Unlock Code
In this guide you will get easy to follow, step by step instructions that will show you how to enter unlock codes into your mobile phone so that it will be unlocked from your current network carrier such as Orange, Vodafone, AT&T, Cingular, T-Mobile, Rogers, Fido, etc. First you need an unlock code of course. If you don't have an unlock code yet, you are only a few clicks away from getting it , visit our store's models page at click here........now you have your unlock code, lets get your mobile phone unlocked, so you can start using it within seconds. No cable or software needed! Just enter the code that you will receive from Global Unlock and you'll have an unlocked mobile phone! Unlocking by entering a code on your phone's keypad is called "unlock by IMEI #". Indeed, it is the most convenient and safest way to unlock your cell phone.
Below are instructions that work for most network providers.
How to Enter Unlock Codes on all Motorola Cell Phones Except MPX
- Switch ON your phone with a not allowed SIM Card,
- Phone should show "Enter Special or Subsidy Code",
- Enter unlock code, if you do not have it visit our models page and choose your model or network, click here
WARNING: if any of these messages appear :
- "Contact Service Provider"
- or "Tamper Alter"
- or "Wait Before Enter Special Code"
- or "Contact Service'It's because you or somebody else has already entered too many wrong codes. You just have to leave the phone ON on the error message and after 1hr - 8hrs the message "Enter Special Code" will appear again!
Note: If your phone is on a 3G network enter **057*, then another window will appear to enter the unlock code.
How to Enter Unlock Codes on Motorola MPX:
I will supply you with 2 unlock codes. One will be the NETWORK PIN and the other the SERVICE PROVIDER PIN.
- Switch ON your phone with a not allowed SIM Card,
- If phone is asking for NETWORK PIN enter the NETWORK PIN we sent you
- If phone is asking for SERVICE PROVIDER PIN. Enter the SERVICE PROVIDER PIN we sent you.
- Your Phone should now be unlocked.
MPX FAQ's:
Question: Phone is asking for NETWORK PUK and a new password twice. I entered the code from yourselves but phone saying "Operation not supported by this SIM card".What should I do?
Answer:
If you still have the original card
Please power on the phone with the original card in and when phone fully powered on (You have access to the menu), then
TYPE: * # * * 3 6 4 # and press green button
you'll get a error message and after it your will see:Engineering menu
Click "Options"
Click "GSM Test"
Select "Send AT command"
Now you will see a new window with :
Send AT Command
type
AT+CLCK="PN",0,"[SERVICE PROVIDER PIN or NETWORK PIN] "
and press send.
If you get Response "0 []" phone is unlocked
If you get 1 error, then make sure you have typed the code correct and try the other code
If you don't have the original card
Please switch your phone off, take battery out. Put battery back in, power on the phone.
Now the phone it will ask to enter NETWORK PUK. Now please DON'T TOUCH the phone for 2 hours.
After 2 hours it will change screen! Now please enter the code received from us and 00000000 (eight zero's) as a new password.
Now the phone will be unlocked.
Question: Phone is asking for SERVICE PROVIDER PUK and a new password twice. I entered the code from yourselves but phone saying "Operation not supported by this SIM card".What should I do?
Answer:
YOU NEED to have the original card
Please power on the phone with the original card in and when phone fully powered on (you have access to the menu), then
TYPE: * # * * 3 6 4 # and press green button
you'll get a error message and after it your see:Engineering menu
Click "Options"
Click "GSM Test"
Select "Send AT command"
Now you will see a new window with :
Send AT Command
type
AT+CLCK="PP",0,"[SERVICE PROVIDER PIN or NETWORK PIN]"
and press send.
If you get Response "0 []" phone is unlocked
If you get 1 error, then make sure you have typed the code correct and try the other code
If you don't have the original card or if the original card is not accepted because you flashed the phone with other firmware, then sorry but we can't help you.
Question:
Why do I have to wait 2 hours before I can enter the code when phone asking for NETWORK PUK?Answer:
This is because Motorola have added an anti brute force protection and if you enter to many codes, the phone will ask for NETWORK PUK and then it will refuse to accept the code even if is the right one.
Question:
After I restart my phone, the phone is asking again for SERVICE PROVIDER PIN. What shall I do to make it stop?Answer:
Follow the instructions from SERVICE PROVIDER PUK and after that it will never ask for the code again.
Hosted by: Design Web Fusion