Free Step By Step Instructions For Blackberry Unlock Code
In this guide you will get easy to follow, step by step instructions that will show you how to enter unlock codes into your mobile phone so that it will be unlocked from your current network carrier such as Orange, Vodafone, AT&T, Cingular, T-Mobile, Rogers, Fido, etc. First you need an unlock code of course. If you don't have an unlock code yet, you are only a few clicks away from getting it , visit our store's models page at click here........now you have your unlock code, lets get your mobile phone unlocked, so you can start using it within seconds. No cable or software needed! Just enter the code that you will receive from Global Unlock and you'll have an unlocked mobile phone! Unlocking by entering a code on your phone's keypad is called "unlock by IMEI #". Indeed, it is the most convenient and safest way to unlock your cell phone.
Below are instructions that work for most network providers.
Below are instructions that work for most network providers. Some unlock codes, such as those for T-Mobile locked cell phones, have to be entered differently and are shown at the end.
How to Unlock Blackberry 8300, 8700 & 8800 Series - Instructions
Inclides: Blackberry 8300, 8310, 8320, 8700c, 8700r, 8700f, 8700g, 8707g, 8707h, 8707v, 8800, 8820
- You must have an original SIM card in your phone to complete these steps (can be active or inactive with the network)
- Goto Setting Menu
- Goto Options Menu
- Go to advanced options
- Go to sim card
- Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
- Type MEP[Alt + 2] ( M E P, Then type Alt key, then 2 )
- You should be presented with a prompt "Enter Network MEP Code". Type in the 16 or 8 digit unlock code, if you do not have it visit our models page and choose your model or network, For Unlock Code click here
- Your phone is now unlocked
How to Unlock BlackBerry 8100 Unlock Codes - Instructions
- Insert SIM into device
- Power phone on and Turn off the radio (Turn Wireless Off option) VERY IMPORTANT.
- Select "Options" THEN SELECT ADVANCED OPTIONS
- Scroll down and select "SIM Card"
- Type "MEPPD" (please note that you will not see what you type on the screen)
- Type "MEPP then [ALT BUTTON] then "2" (please note that you will not see what you type on the screen)
- Enter the Unlock Code
- Press enter For Unlock Code click here
- Reboot device. Device is now unlocked.
How to Unlock BlackBerry 7100 (7100v) Unlock Codes - Instructions
Warning! The Wireless Mode MUST BE OFF before performing the given SIM Unlock instructions in order to avoid causing the device from becoming defective.
How to turn Wireless Mode Off:
- Scroll to the Airplane Icon (Turn Wireless Off.)
- Press Select.
- Wireless Mode will turn off.
- REMOVE the SIM card
- Power On the Device (Put the Battery back in)
How to SIM Unlock the device:
- Go to the "Tools" screen
- Select "Settings"
- Select the "SIM Card" option
- Type MEPPD
- It should then display a list "SIM, Network, Network Subset, etc..."
- To select "Network" type MEPP Alt-2
- It should then ask for the code
- Enter the unlock code For Unlock Code click here
- For Unlock Code click here
How to Unlock Codes on BlackBerry 6xxx 7xxx: ie 6230, 7100, 7290 etc.:
- Select Options menu on BB.
- Now you select SIM CARD menu. To be able to see this you have to type this on the keypad on phone : (TEXT WILL NOT APPEAR ON THE SCREEN until you enter the unlock code)
- Type 'MEPD' for all models except 7100 in which case in case use 'MEPPD'.
- Usually you should see "active" NET lock. Now in order to disable this lock type 'MEP2' respectively 'MEPP2' if phone is 7100 and will appear a dialog asking for code. NOTE: You must use the "alt" or "shift" key to enable numbers so example would be: m-e-p-"alt key"-2.
- Now you should see the place to enter your net unlock code. (if not, you didn't type in mep2 or mepp2 properly.)
- Here you must enter the "NET Unlock Code" that the bb unlocker showed you and hit return. For Unlock Code click here
Hosted by: Design Web Fusion